Customer reviews & testimonials - custom vacuum forming & plastic trays
It's very important to us that our customers are pleased with the products and services that we provide - here are some reviews / testimonials from just a few of our happy custom vacuum forming & plastic trays customers.
The trays arrived ok, earlier than said which was great. From start to finish the ordering was excellent with updates from your company. This time with the trays we went a little thicker and with the oil resistant material, to work with the rust preventer we use. In the time they have been on the shop floor, we haven't had any problems. We use the trays for a high volume part number ( Fuel injection burner head ) and they fit in the trays just right. The part will go through 15 different processes in the trays. The trays are used in house and will also be used on other small products as well. Overall we are pleased with the service and will be looking at other trays in the near future to suit our products.
Steve Emmonds, Continuous Improvement Engineer, Kigass Aero Components Ltd
Kigass Aero Components Ltd
Toolcraft was very helpful form the start, coming up with material & design advice and designing the tray exactly as I'd had in mind. After swiftly making the vacuum forming tool, they sent me samples to try the fit in our existing sinks. The trays were exactly right and Toolcraft fulfilled our full order shortly afterwards. I'm very pleased with the end result and the service from Toolcraft.
Ian Wright, Senior Lab Technician and Deputy Teaching Manager
Faculty of Health and Medical Sciences, University of Surrey
What has impressed is how Toolcraft have helped us through a couple of test batches to get the final product to suit our requirements. This is not a product we have purchased before so we needed a little more hand holding than we thought. Everyone from Russ down has really tried to satisfy our needs and we now have tool trays on our shop floor that look likely to be ideal for us. Very Impressed.
Martyn Cross, Production Manager, Marlor Tooling Ltd
We had an urgent requirement for a vacuum formed ESD tray to protect our static sensitive devices. We sent Toolcraft a sample design together with our requirements and they designed the tray, created the vacuum forming tool, sent us samples, carried out a tool modification, sourced the roller cutter and produced the finished trays all within a few weeks. We are very happy with their custom tray service !
Allan Reilly, Static Scotland Ltd
Helpful, listens to requirements and provides solutions to packaging problems. Will use again in the future.
Richard Quinlan, Blatchford Products Ltd
Toolcraft have supplied us with custom and standard plastic trays for many years now. They always deliver promptly and the trays are excellent quality & allow us to protect our sensitive electronic devices.
Emma Jones, Silver Telecom
Toolcraft have produced our slide valve plastic injection mouldings for over 10 years. To have them safely shipped to us, we provided Toolcraft with cardboard packaging trays. When we could no longer source these, Toolcraft offered us an excellent solution. They made a free tool insert to fit within one of their existing vacuum forming Tray Frames to make us a batch of plastic trays, complete with matching lids instead. The new plastic tray is the same size as the old cardboard packaging tray, so that it still fits our existing boxes. The new tray is much sturdier, ensuring safe transport of our product.
Nigel Ritchie, Manufacturing Manager, Horne Engineering
I would like to take this opportunity to thank you all for you assistance in this from the outset. I am very pleased with the expediency and in particular the quality of the product which is perfect for our needs.
R. Moss, Eco Tech Computers Ltd.
David and I would like to thank you for the service you have provided so far, we're very happy with everything & will certainly be using Toolcraft Plastics again.
Shirley Wright, Director, InvisiTech