reusable electronic component assembly trays
Below are some product assembly trays that have just been made or are coming soon and thus, are not listed on the other Trays by... thumbnail image pages. Thesereusable trays
will be strong and great solutions toelectronic component assembly
or product assembly problems.
The sizes & images of theproduct assembly trays
listed below are correct. Please click images of component trays etc below which will either link you to the prices grouped further down on this page or provide a link for you to contact us for solutions to your assembly problems or to place orders.
|All dimensions Length x Width x Depth in mm.|
|620 x 420 x 54
FDAxx trays ››
|620 x 420 x 72
FEAxx trays ››
|620 x 420 x 100
FFAxx trays ››
|555 x 355 x 49
S8Txx trays ››
FSLS7Txx or S8Txx Flat Sheet Lid Unit Prices :-ASC £4.05 BLK £2.30 ECO £2.15 OCR £3.85 RGB £2.30 made from 1mm plastic sheet.
Minimum Quantity is 30 per type - ASC etc.
|508 x 370 x 40
X7Pxx trays ››
|Sxxxx & Xxxxx moveable pockets explained|
|The tooling for the Sxxxx & Xxxxx reusable electronic component assembly trays comprises of 30 mm deep tray outer frames & inserts to make the standard pocket sizes listed above - Xxxxx trays are 40 mm deep
However, the pockets can be moved from their standard F1 positions listed to lower down F2 in the tray outer frame to make trays with effectiveEffective Pocket Depth explainedIf a e.g. 20 mm deep pocket is moved from 20 mm to 30 mm from the top of the tray, 30 mm parts will fit in the pockets without poking above the top of the tray. This movement makes an Effective Pocket Depth of 30 mm, but the actual pocket depth remains 20 mm.
pocket depths of up to 30 mm. This allows taller parts to fit in the trays, but the actual pocket depth remains the same.
|Pocket dimensions stated are for each pocket||F1: S1018 with blue pockets at
standard depth positions
listed under each tray image
|F2: S1018 with blue pockets
positioned lower in trays to
give effective depths of 30mm